1. Turn off the power to your doorbell.
2. Remove your current doorbell button and disconnect the two wires.
3. Some designs will require that the body of the Doorbell ringer before the mounting bracket can be attached.
4. Using supplied hardware, screw your new mounting bracket to the doorjamb pulling wires throught the large buttonhole.
5. Attach one wire to each terminal on the new Doorbell button and push the button into the mounting bracket. (NOTE: It does not matter which wire is attached to which terminal)
6. If required, reattach the body of the Doorbell to the mounting bracket using supplied hardware.
7. Return power to the Doorbell.



If you have a question, or you need personal  attention, please feel free to email, or
telephone us Toll Free at 1-866-293-2445 to speak to a live CustomerCare representative.